Hermle C 52 U Five-Axis Machining Centre with HIMS

Hermle’s new large part C 52 U five-axis machining centre is equipped only with the standard tool magazines, but provides diverse applications for full processing and finishing work with required degree of precision.

With around 2,000 ‘sharp’ tools—each provided with a chip, include around 250 different milling tools, and around 300 for drilling and thread cutting. This allows tools to be deployed as required, with reduced changing and equipping times.

It features the Hermle Information Monitoring Software (HIMS) for display of life status and transmission of the information by email. Its working range of X=1,000; Y=1,100; Z=750 mm and 700 mm swivelling rotary table with a load-bearing capacity of 2,000 kg facilitates full/finishing machining of highly intricate tool and mould components, or base plate.

CHECK OUT THESE OTHER ARTICLES

● Micro Electrical Discharge Technologies
● EMO 2019: Mobile Hybrid Machining For The Tool And Die Industry
● OnRobot Wins Gold in LEAP Awards
● Kennametal Makes Hard Turning More Cost-Effective
● Nissan Teaches Robots To Make Replacement Parts For Cars
● Walter Ewag: Laser Line Precision
● One Technology—Many Benefits
● Kennametal Releases HARVI I TE Four-Flute Solid Carbide End Mill
● Kennametal KOR 5: The King Of Roughing
● A Look at Walter’s Two-in-One Machining Concept

WANT MORE INSIDER NEWS? SUBSCRIBE TO OUR DIGITAL MAGAZINE NOW!

FOLLOW US ON: LinkedIn, Facebook, Twitter